The CCG E1W Gland is designed for Steel Wire Armoured cables for outdoor use where a seal on the inner and outer sheath is required to obtain a high level of IP protection. The gland features two-part handling, no loose parts and a freely rotating captive cone providing an armour clamp and earth bond without twisting the armouring. Seals to IP68 if fitted with a sealing washer.
• For indoor and outdoor use.
• Two-part handling, no loose parts.
• Freely rotating captive cone, providing an armour clamp and earth bond without twisting the armouring
• Factory fitted captive elastomeric inner seal for Built In Safety™.
• Seals on both the inner and outer sheath to IP65 / IP66 / IP68
• Supplied complete with IP sealing washer.
Design Standards: BS 6121 Part 1 EN 50262 IEC/BS EN 62444 SANS 62444 SANS 1213
Installation: AS/NZS 3000 BS 7430 BS 6121-5 IEC 60364-5-54
Protection: IP66 / IP68 (100m - Parallel) IEC 60529
Marine: ABS IEC 60529, IEC 62444, DNV IEC 60529, BS 6121, IEC 62444
London Underground Approval: BS EN 62444
Temperature Range: -65°C to 120°C
Material (Gland): Brass (Nickel Plated) BS 2874 / EN 12164
Material (Seal): Thermoset Elastomer