The EX CORROSION GUARD™ Gland is designed for use in highly corrosive and wet
locations. The screw on Corrosion Guard™ shroud is manufactured from corrosion
resistant non-metallic material, providing total enclosure of the steel wire armour and
metal parts of the gland. Internally the MAC (Multi-Armour Captive Cone), provides an
armour clamp and earth bond with Steel Wire, Braid and Tape armoured cables. The
patented disconnect system also allows inspection of the armour clamp and inner seal
after assembly.
• For indoor and outdoor use in hazardous areas.
• Extreme corrosion resistance.
• Factory fitted captive elastomeric inner seal for Built In Safety™.
• Seals on both the inner and outer sheath to IP66 / IP67 / IP68
• Supplied complete with IP sealing washer.
Hazardous: IECEx: Ex d IIC Gb, Ex e IIC Gb, Ex nR IIC Gc, Ex tb IIIC Db
Classification ATEX: II 2G, II 2D, II 3G, Ex db IIC Gb, Ex eb IIC Gb, Ex tb IIIC Db, Ex nR IIC Gc
Certification: IECEx ITA 12.0014X IEC 60079-0, IEC 60079-1, IEC 60079-7
IEC60079-15, IEC60079-31
CML 16ATEX1001X EN 60079-0, EN60079-1, EN60079-7, EN 60079-31
CML 16ATEX4002X EN 60079-0, EN 60079-15
TUV15.0483X ABNT NBR IEC 60079-0,1,7,15 and 31
MASC MS/13-028X SANS/IEC 60079-0, SANS/IEC 60079-1
SANS/IEC 60079-7, SANS/IEC 60079-15
SANS/IEC 60079-31
Marine: ABS 14-SG1216922-PDA / DNV-GL TAE0000010
EMC Compatible: SGS EMC197708/1
Protection: IP66 / IP68 (2m) IEC 60529
Temperature Range: -20°C to 95°C
Material (Gland): Brass / Nickel Plated Brass
Material (Seal): Thermoset Elastomer