GripLoc® Consumer Unit Flat Form Kits - Nylon

GripLoc® Consumer Unit Flat Form Kits - Nylon

GripLoc® Consumer Unit Flat Form Kits offer a complete solution to address the regulations included in Amendment 3. Special multi-hole seals have been designed to suit our GripLoc® Kits and are available in both Metal (Nickel Plated Brass) and Plastic (Nylon 66). Inserts are designed to accept flat form cables either as single or multiple configurations and cover flat forms cables from 1.0m² to 16mm². Certified to IP68 ingress protection. Specially designed to fit in compact M20, M25 and M32 glands ensuring maximum compatibility with new Metal Enclosure consumer units.

• Multiple insets; 1.0mm² to 16.0mm² in just two gland sizes M20, M25 & M32
• Blanking plug included if single cable entry is required
• GripLoc Seal® - Superior Ingress Protection, mechanical grip and cable retention
• Zero Halogen Plastic or Metal


Material: PA66 (Nylon) UL94 V2 or Nickel Plated Brass BS 2874 CZ121 Pb3
Colour: Nickel Plated or Grey, - Black, Red, White available to order

Swipe table
FFK2/1.5N 2x 1.0-1.5mm² Flat Form M20 x 1.5 Nylon 27.0 24.0 £0.72 £0.86
FFK1/2.5N 1x 2.5-4.0mm² Flat Form M20 x 1.5 Nylon 27.0 24.0 £0.75 £0.90
FFK2/2.5N 2x 2.5-4.0mm² Flat Form M25 x 1.5 Nylon 31.0 33.0 £0.82 £0.98
FFK1/4.0N 1x 4.0mm² Flat Form M25 x 1.5 Nylon 31.0 33.0 £0.91 £1.09
FFK1/6.0N 1x 6mm² Flat Form M25 x 1.5 Nylon 31.0 33.0 £0.98 £1.18
FFK1/10.0N 1x 10mm² Flat Form M25 x 1.5 Nylon 31.0 33.0 £1.08 £1.30
FFK1/16.0N 1x 16mm² Flat Form M32 x 1.5 Nylon 39.0 42.0 £2.11 £2.53

To help improve our website we use cookies, by using this site you agree that we may store these on your device. For more information on what cookies are and why we use them please read our Cookies and Privacy Policy.