Adhesive lined, heatshrink wraparound repair sleeve comes complete with a
flexible stainless-steel locking channel. This provides a permanent closure system.
The heatshrink is covered with a thermochromatic paint which changes colour
when achieving the correct shrink temperature.
• Wraparound heatshrink is easy to install in situ over live cable without cutting the cable or shutting down power.
• Used for general re-jacketing and sealing applications, and for protection of damaged cable or repair of cable joints.
Temperature Indicating Paint Colour Conversion:
150°C for 30 minutes - no change
250°C for 5 minutes - colour change
Dielectric Strength: 12 kV/mm min
Temperature Range: -30°C to 70°C
Shrink Temperature: +120°C
Tensile Strength: 17.5 N/mm² min
Tensile Strength After Heat Ageing: 500 hours @ 120°C - 15 MPa min
Elongation: 300% min
Elongation After Heat Ageing: 500 hours @ 120°C - 200% min
Material: Cross-linked Polyolefin
Colour: Black